What is the normal operation method of the bubble film machine? The 3 layers bubble film machine manufacturer tells you that it is very important to master the correct operation method when operating the bubble film machine, so what is the correct operation method of the bubble film machine? Let us work together take a look.

1. Check and control the ratio of raw materials and mix them evenly.
2. Check whether the temperature control of the composite bubble film machine is good, whether the heating appliances are in good condition, and pay attention to timely adjust the heating temperature of each point within the index range.
3. Observe and adjust the uniformity of film thickness, and the folding diameter meets the standard.
4. Check whether there are impurities on the raw materials of the composite air bubble film machine, especially iron mixed with magnets.
5. Regularly check the temperature rise of each running motor of the composite air bubble film machine and the transmission of the air bubble film machine.
6. Check the pulling speed and control the film thickness.
7. Check the pressure of the air storage tank of the composite air bubble film machine, not too high, but have a backup pressure.
8.3 The layers bubble film machine manufacturer tells you to check the lubrication of the reducer and air compressor cylinder.
Therefore, when operating the bubble film machine, these details must be done well to ensure its good performance.
What are the operating details of the bubble film machine? The 3 layers bubble film machine manufacturer tells you that the correct operation of the bubble film machine affects its service life, so it is necessary to master some operating details of the bubble film machine. Let's follow us to understand the operation details.
1. Check the speed and control the film thickness so that there is no deviation in the production process and the quality can be improved.
2. Detecting the temperature rise and mechanical transmission of each running motor is necessary to ensure normal production.
3. Check the working temperature regularly, and deal with it in time if there is any abnormal temperature.
4. Observe whether the thickness of the film is uniform and whether there is any deviation in the width of the film blown by the film blowing machine, and adjust it in time.
5.3 The layers bubble film machine manufacturer tells you to check the lubrication of the gearbox and the cylinder of the air compressor when starting up.