The normal operation method of 3 layers bubble film machine

What is the normal method of operation for a 3 layers bubble film machine? When operating the bubble film machine, it is very important to master the correct operation method, so why do you share what is the correct operation method of the bubble film machine? Let's look together.

1. Check and control the ratio of raw materials and mix them evenly.
2. Check whether the temperature control of the 3 layers bubble film machine is good, whether the heating appliances are in good condition, and pay attention to timely adjust the heating temperature of each point within the index range.
3. Observe and adjust the uniformity of film thickness, and the folding diameter meets the standard.
4. Check whether there are impurities on the raw materials of the 3 layers bubble film machine, especially iron mixed with magnets.
5. Regularly check the temperature rise of each running motor of the air bubble film machine and the transmission of the air bubble film machine.
6. Check the pulling speed and control the film thickness.
7. Check the pressure of the air storage tank of the bubble film machine, it should not be too high, but there must be a backup pressure.
8. Check the lubrication of the reducer and air compressor cylinder.
Therefore, when operating the 3 layers bubble film machine, these details must be done well to ensure its good performance.

Pre

3 layers bubble film machine maintenance tips in daily life

What are the production characteristics of Bubble insulation machine

Back to list