Current location:
Homepage
>
>
>
bubble film equipment is a machine designed for the production of bubble film

bubble film equipment is a machine designed for the production of bubble film

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2022-10-31
  • Views:0

(Summary description)The bubble film equipment is a machine designed for the production of bubble film, which can continuously produce polyethylene syntactic foam through a single molding process. The whole machine is variable frequency speed regulation.

bubble film equipment is a machine designed for the production of bubble film

(Summary description)The bubble film equipment is a machine designed for the production of bubble film, which can continuously produce polyethylene syntactic foam through a single molding process. The whole machine is variable frequency speed regulation.

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2022-10-31
  • Views:0
Information

The bubble film equipment is a machine designed for the production of bubble film, which can continuously produce polyethylene syntactic foam through a single molding process. The whole machine is variable frequency speed regulation, the machine function is stable, durable, strong adaptability, easy to operate and high efficiency, with the advantages of effective energy saving and so on. The bubble mold produced by bubble film equipment, also known as air cushion mold, bubble mold, bubble paper, etc., is a pressure-resistant, moisture-proof and shock-proof chemical product used for packaging and filling.

china bubble film equipment company
The bubble film equipment is made of low density polyethylene through a bubble film machine, but do you know how the bubbles on the bubble mold are made? Let's take a look. Firstly, according to the soft and hard requirements of the bubble mold, different kinds of resin materials are selected, the granular materials are sucked into the mixer, the different kinds of materials are mixed and stirred evenly in a certain proportion, and the mixed materials are sent to the next process through the pipeline. The material is put into an extrusion molding machine, heated at a high temperature of 230 degrees Celsius to melt the granular material, and the molten resin will be sent to the blow molding machine. A thin die is made by extruding and expanding resin, by pulling and injecting air inward at the exit of the die, it will be molded into a cylindrical film, and by injecting air it can be made more uniform in thickness. The thin cylindrical die is then cut into two pieces with a knife and placed on the roll. The two-layer thin mold is made of a pressure roller to make a double-layer thin mold, which is softened by heating the thin mold, and then slowly wound on a vacuum forming roller with a round hole. There are many small holes in the round holes of these forming rolls, which are connected to the machine to extract air. The vacuum forming rolls can suck out the countless air bubbles on the thin mold. These bubble molds produced by bubble film equipment can be used for packaging by cutting and bundling.
Then learn about the precautions for bubble film equipment: always check whether the temperature control of the bubble film machine is complete, whether the heating equipment is complete, and pay attention to adjusting the heating temperature of each point in time within the index range. Check the pulling speed frequently and control the die thickness. Observe and adjust the uniformity of die thickness, and the folding diameter meets the specification. Check the pressure of the air tank frequently, it should not be too high, but there should be a backup pressure. Check the proportions of the control materials and mix well. Check whether there are impurities in the material, especially iron mixed with magnets in time. Check the lubrication of the reduction box and the air compressor cylinder, regularly check the temperature rise of each running motor and the transmission of the bubble film machine.

Keyword:

Scan the QR code to read on your phone

相关资讯

11-28

Plastic bubble wrap making production line manufacturers show you whether the bubble wrap can be recycled

Plastic bubble wrap making production line manufacturers tell you that with the continuous development of society, ecological development is particularly important.
11-21

Insulation aluminized bubble machine's sophisticated diversification

Insulation aluminized bubble machine products have the advantages of light weight, good elasticity, high transparency, and also have the advantages of sound insulation and shock resistance.
11-14

Features of Insulation aluminized bubble machine

The Insulation aluminized bubble machine adopts a one-time molding process, which is based on the innovation, transformation and design of the bubble film machine. The modified machine can compound kraft paper, PE film, pearl cotton.
Previous page
1
2
13

Any question? Call us  +86-757-22801782

add

Fax:

NO 28-1 FUAN INDUSTRIAL ARE, LELIU STREET, SHUNDE, FOSHAN CITY

email

E-mail:

info@malexco.com

GuangDong Malex Machinery Technology Co.,Ltd

Advanced technology promoters of air bubble film machinery

malex

LEAVE A MESSAGE

Username used for comment:
Feedback
Description:
验证码

Copyright © 2020 GuangDong Malex Machinery Technology Co.,Ltd.     All Right Reserved.   粤ICP备10042079号     Powered by:300.cn 

  • +86-757-22801782