Current location:
Homepage
>
>
>
5 What problems are prone to occur in the use of layer bubble film machine

5 What problems are prone to occur in the use of layer bubble film machine

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2022-09-28
  • Views:0

(Summary description)5 What's wrong with the ease of use of the layer bubble film machine? The following bubble film machine manufacturers summarize for you. There are many problems in the use of the bubble film machine.

5 What problems are prone to occur in the use of layer bubble film machine

(Summary description)5 What's wrong with the ease of use of the layer bubble film machine? The following bubble film machine manufacturers summarize for you. There are many problems in the use of the bubble film machine.

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2022-09-28
  • Views:0
Information

5 What's wrong with the ease of use of the layer bubble film machine? The following bubble film machine manufacturers summarize for you. There are many problems in the use of the bubble film machine, so what problems are prone to occur in the bubble film machine? Let me introduce to you today.

Buy 5 layer bubble film machine manufacturers
5 The layer bubble film machine should be assigned a special person to operate the equipment, and the screw of the extruder should not run idly, so as not to scratch the screw and barrel. After shutdown, if there is material in the barrel, before starting the machine again, it must be possible to raise the temperature of each temperature zone to the requirements of the state-regulated enterprise according to different process design requirements, and keep it warm for more than 30 minutes before starting the machine. When the temperature does not meet the requirements, it is strictly forbidden to start, so as not to damage the parts.
When feeding the material into the hopper of the 5 layer bubble film machine, it is necessary to ensure that the material is clean, prevent various metal surface debris, sand and small tools from entering the material port, and prevent damage to the drum and screw. If there is abnormal noise during operation, stop immediately for analysis and processing.
To sum up, this is the problem that is easy to occur in the use of 5 layer bubble film machine. I hope it will be helpful to everyone. If you need it, you can call the company's official website and we will arrange professional people to answer it for you!

Keyword:

Scan the QR code to read on your phone

相关资讯

11-28

Plastic bubble wrap making production line manufacturers show you whether the bubble wrap can be recycled

Plastic bubble wrap making production line manufacturers tell you that with the continuous development of society, ecological development is particularly important.
11-21

Insulation aluminized bubble machine's sophisticated diversification

Insulation aluminized bubble machine products have the advantages of light weight, good elasticity, high transparency, and also have the advantages of sound insulation and shock resistance.
11-14

Features of Insulation aluminized bubble machine

The Insulation aluminized bubble machine adopts a one-time molding process, which is based on the innovation, transformation and design of the bubble film machine. The modified machine can compound kraft paper, PE film, pearl cotton.
Previous page
1
2
13

Any question? Call us  +86-757-22801782

add

Fax:

NO 28-1 FUAN INDUSTRIAL ARE, LELIU STREET, SHUNDE, FOSHAN CITY

email

E-mail:

info@malexco.com

GuangDong Malex Machinery Technology Co.,Ltd

Advanced technology promoters of air bubble film machinery

malex

LEAVE A MESSAGE

Username used for comment:
Feedback
Description:
验证码

Copyright © 2020 GuangDong Malex Machinery Technology Co.,Ltd.     All Right Reserved.   粤ICP备10042079号     Powered by:300.cn 

  • +86-757-22801782