language
中国
韩国
韩国
韩国
韩国
韩国
Current location:
Homepage
>
>
>
What to check before Air bubble film production line starts

What to check before Air bubble film production line starts

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2022-09-15
  • Views:0

(Summary description)What are the inspections before starting the Air bubble film production line? Let me give you a brief introduction below.

What to check before Air bubble film production line starts

(Summary description)What are the inspections before starting the Air bubble film production line? Let me give you a brief introduction below.

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2022-09-15
  • Views:0
Information

What are the inspections before starting the Air bubble film production line? Let me give you a brief introduction below.

china Air bubble film production line company
1. Check the power supply, vacuum system, air pressure system, and cooling system before each startup. After the equipment is started, check whether the rotation direction of each rotating part is correct. Usually, pay attention to check the lubrication condition of each lubricating part. normal care and maintenance.
2. The manufacturer of Air bubble film production line tells you to assign special personnel to operate the equipment, and it is not allowed to idle the extruder screw without material to avoid scratches on the screw and barrel. After shutdown, if there is material stored in the barrel, before starting the machine again, it is necessary to raise the temperature of each temperature zone to the requirements of the rules according to the process requirements, and keep the temperature for more than 30 minutes before starting the machine. It is strictly forbidden to start the machine before the temperature reaches the requirements. , to avoid damage to the parts.
3. The manufacturer of Air bubble film production line tells you that when feeding the hopper, it is necessary to ensure that it is clean, and to prevent metal debris, sand and small tools from entering the material port, so as to prevent damage to the barrel and screw, if abnormal noise is found during work , you should park the car immediately.
The relevant content about what to check before the Air bubble film production line starts is introduced here, I hope it will be helpful to you.

Keyword:

Scan the QR code to read on your phone

相关资讯

09-28

5 What problems are prone to occur in the use of layer bubble film machine

5 What's wrong with the ease of use of the layer bubble film machine? The following bubble film machine manufacturers summarize for you. There are many problems in the use of the bubble film machine.
09-21

Air bubble film production line manufacturers take you to understand why bubble film is favored by customers

Air bubble film production line manufacturers said that many people want to know how the bubble film is so popular with customers? The following will reveal to you.
09-15

What to check before Air bubble film production line starts

What are the inspections before starting the Air bubble film production line? Let me give you a brief introduction below.
Previous page
1
2
10

Any question? Call us  +86-757-22801782

add

Fax:

NO 28-1 FUAN INDUSTRIAL ARE, LELIU STREET, SHUNDE, FOSHAN CITY

email

E-mail:

info@malexco.com

GuangDong Malex Machinery Technology Co.,Ltd

Advanced technology promoters of air bubble film machinery

malex

LEAVE A MESSAGE

Username used for comment:
Feedback
Description:
验证码

Copyright © 2020 GuangDong Malex Machinery Technology Co.,Ltd.     All Right Reserved.   粤ICP备10042079号     Powered by:300.cn 

  • +86-757-22801782