Bubble insulation machine is an indispensable mechanical equipment in the production process. Bubble insulation machine is actually a film with bubble interlayer in the middle of the film. If you do not control the Bubble insulation machine well, it is very likely that under the limited time and material constraints, your product quality and output are not so ideal; on the contrary, if you control the Bubble insulation machine well, within a limited time and Under the limitation of materials, the quality of your products is not only high-quality, but also the output of products is very full. So how to standardize the operation of our Bubble insulation machine, the following is a brief introduction to everyone.

1. Check that the temperature self-control is in good condition, and the heating appliances are in good condition. Pay attention to adjusting the heating temperature of each point in time to be within the index range.
2. Check the traction speed and control the film thickness.
3. Observe and adjust the uniformity of film thickness, and the folded diameter meets the standard.
4. Check the pressure of the air storage cylinder. It should not be too high, but there should be a backup pressure.
5. Check and control the ratio of raw materials and mix them evenly.
6. Check the raw materials for impurities, especially use a magnet to check the iron mixing in time.
7. Check the position of the gearbox and the lubricating oil of the air compressor cylinder.
8. Regularly check the temperature rise of each running motor and the transmission of the Bubble insulation machine.