Current location:
Homepage
>
>
>
Inspection before starting the air bubble sheet machine

Inspection before starting the air bubble sheet machine

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2022-06-09
  • Views:0

(Summary description)What should be checked before the air bubble sheet machine is turned on? Let's take a closer look at it below.

Inspection before starting the air bubble sheet machine

(Summary description)What should be checked before the air bubble sheet machine is turned on? Let's take a closer look at it below.

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2022-06-09
  • Views:0
Information

What should be checked before the air bubble sheet machine is turned on? Let's take a closer look at it below.

Low price air bubble sheet machine supplier(s)
1. The manufacturer of the air bubble sheet machine tells you that you should check the power supply, vacuum system, air pressure system, and cooling system before starting the machine. After the equipment is started, you should check whether the rotation direction of each rotating part is correct, and usually pay attention to checking the lubrication condition of each lubricating part. , The appearance of the electrical appliance should be maintained and maintained normally in accordance with the regulations.
2. Special personnel should be assigned to operate the equipment, and the extruder screw should not be allowed to idle without material, so as to avoid scratches on the screw and barrel. The manufacturer of the air bubble sheet machine tells you that after the machine is stopped, if there is material in the barrel, before starting the machine again, it is necessary to raise the temperature of each temperature zone to the requirements of the rules according to the process requirements, and keep it warm for more than 30 minutes before starting the machine. It is strictly forbidden to start the machine before the temperature reaches the requirements to avoid damage to the parts.
3. The manufacturer of the air bubble sheet machine tells you that when feeding the hopper, it is necessary to ensure that it is clean, and to prevent metal debris, sand and small tools from entering the material port, so as to prevent damage to the barrel and screw. If abnormal noise is found during work, Park the car immediately for disposal.

Keyword:

Scan the QR code to read on your phone

相关资讯

11-28

Plastic bubble wrap making production line manufacturers show you whether the bubble wrap can be recycled

Plastic bubble wrap making production line manufacturers tell you that with the continuous development of society, ecological development is particularly important.
11-21

Insulation aluminized bubble machine's sophisticated diversification

Insulation aluminized bubble machine products have the advantages of light weight, good elasticity, high transparency, and also have the advantages of sound insulation and shock resistance.
11-14

Features of Insulation aluminized bubble machine

The Insulation aluminized bubble machine adopts a one-time molding process, which is based on the innovation, transformation and design of the bubble film machine. The modified machine can compound kraft paper, PE film, pearl cotton.
Previous page
1
2
13

Any question? Call us  +86-757-22801782

add

Fax:

NO 28-1 FUAN INDUSTRIAL ARE, LELIU STREET, SHUNDE, FOSHAN CITY

email

E-mail:

info@malexco.com

GuangDong Malex Machinery Technology Co.,Ltd

Advanced technology promoters of air bubble film machinery

malex

LEAVE A MESSAGE

Username used for comment:
Feedback
Description:
验证码

Copyright © 2020 GuangDong Malex Machinery Technology Co.,Ltd.     All Right Reserved.   粤ICP备10042079号     Powered by:300.cn 

  • +86-757-22801782